Honda Hawk GT NT650 1988 Service Manual page 221

BATTERY/CHARGING SYSTEM
ALTERNATOR
INSPECTION
NOTE
It is not necessary to remove the stator coil to make this
test.
Remove the seat and rear cowling (page 13-25).
Disconnect the alternator 3P (WHITE) connector.
Measure the resistance between the yellow wire terminals and
check for no continuity between each terminal and ground.
STANDARD:
0.1-1.0
n
(20°C/68°F)
Replace the stator if the resistance is out of specification or if
there is continuity between any yellow wire terminal and
ground.
15-10
(1) ALTERNATOR
3P (WHITE) CONNECTOR