Honda Hawk GT NT650 1988 Service Manual page 160

Install the brake disc onto the wheel hub with the minimum
thickness marking (MIN TH 4.0 mm) facing out.
Clean and apply locking agent to the mounting bolt threads.
Tighten the bolts to the specified torque in a crisscross pattern
in 2 or 3 steps.
TORQUE: 40 N·m (4.0 kg-m. 29 ft-Ibl
-'-------------
Do not get grease on the brake disc or stopping power will be
reduced.
Coat the speedometer gear retainer with clean grease and in-
stall the retainer into the wheel hub. aligning the tangs with
the slots in the hub.
Apply clean grease to the dust seal lip and install the dust seal
over the gear retainer.
Fill the speedometer gear box with clean grease and install the
drive gear.
Install the speedometer gear box into the wheel hub.
Apply clean grease to the right dust seal lip and install the seal
into the wheel.
Install the side collar.
FRONT WHEEL/SUSPENSION/STEERING
12-11