Unstake the eccentric bearing carrier lock nut and remove the
nut.
Remove the lock washer and side collar.
Remove the brake caliper mounting bolts.
Swing the brake caliper from the brake disc while holding it
with a piece of wire or something suitable.
Remove the spindle.
Remove the final driven flange assembly and remove the drive
chaine from the sprocket.
Remove the snap ring and brake disc guard plate.
Remove the eccentric bearing carrier from the swingarm.
REAR WHEEl/SUSPENSION
(2) FINAL DRIVEN FLANGE'
p:::iBAKE
DISC GUARD PLATE
\
13-7