Honda Hawk GT NT650 1988 Service Manual page 101

ALTERNATOR/STARTER CLUTCH
ASSEMBLY
Install the oneway clutch into the clutch outer with the flange
side facing inside.
TORQUE: 30 N'm (3.0 kg-m. 22 ft-Ib)
Hold the flywheel with the flywheel holder. Apply locking
agent to the torx bolt threads and tighten the bolts.
TOOLS:
Flywheel holder
Torx bit
07725-0040000 .
07703_0010100}EqUlvalen.t
commercially
available
in U.S.A.
FLYWHEEL INSTALLATION
Clean the crankshaft and install the woodruff key.
Install the needle bearing onto the crankshaft.
• The flywheel bolt has left hand threads.
TORQUE: 130 N'm (13.0 kg-m. 94 ft-Ib)
Install the driven gear and flywheel. aligning the woodruff key
on the crankshaft with the flywheel keyway.
07725-0040000 Equivalent
commercially available in U.S.A.
Hold the flywheel with the flywheel holder. install the washer
and flywheel bolt and tighten the bolt.
NOTE
TOOL:
Flywheel holder
8-5