Hardcopy Commands - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:HARDcopy Commands

Set and query the selection of hardcopy device and formatting options. See
"Introduction to :HARDcopy Commands"
Table 48 :HARDcopy Commands Summary
Command
:HARDcopy:AREA <area>
(see page 233)
:HARDcopy:APRinter
<active_printer> (see
page 234)
:HARDcopy:FACTors {{0
| OFF} | {1 | ON}}
(see page 235)
:HARDcopy:FFEed {{0 |
OFF} | {1 | ON}} (see
page 236)
:HARDcopy:INKSaver
{{0 | OFF} | {1 |
ON}} (see page 237)
:HARDcopy:PALette
<palette> (see
page 238)
n/a
:HARDcopy:STARt (see
page 240)
Introduction to
The HARDcopy subsystem provides commands to set and query the
:HARDcopy selection of hardcopy device and formatting options such as inclusion of
Commands
instrument settings (FACTors) and generation of formfeed (FFEed).
:HARDC is an acceptable short form for :HARDcopy.
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
Query
:HARDcopy:AREA? (see
page 233)
:HARDcopy:APRinter?
(see page 234)
:HARDcopy:FACTors?
(see page 235)
:HARDcopy:FFEed? (see
page 236)
:HARDcopy:INKSaver?
(see page 237)
:HARDcopy:PALette?
(see page 238)
:HARDcopy:PRinter:LIS
T? (see page 239)
n/a
Commands by Subsystem
on page 231.
Options and Query Returns
<area> ::= SCReen
<active_printer> ::= {<index> |
<name>}
<index> ::= integer index of
printer in list
<name> ::= name of printer in
list
{0 | 1}
{0 | 1}
{0 | 1}
<palette> ::= {COLor | GRAYscale
| NONE}
<list> ::= [<printer_spec>] ...
[printer_spec>]
<printer_spec> ::=
"<index>,<active>,<name>;"
<index> ::= integer index of
printer
<active> ::= {Y | N}
<name> ::= name of printer
n/a
5
231