Function:goft:source2 - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:FUNCtion:GOFT:SOURce2

Command Syntax
:FUNCtion:GOFT:SOURce2 <value>
<value> ::= CHANnel<n>
<n> ::= {{1 | 2} | {3 | 4}} for 4ch models, depending on SOURce1
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce2 command selects the second input channel
for the g(t) source that can be used as the input to the FFT, INTegrate,
DIFFerentiate, or SQRT functions.
If CHANnel1 or CHANnel2 is selected for :FUNCtion:GOFT:SOURce1, the
SOURce2 selection can be CHANnel1 or CHANnel2. Likewise, if CHANnel3
or CHANnel4 is selected for :FUNCtion:GOFT:SOURce1, the SOURce2
selection can be CHANnel3 or CHANnel4.
Query Syntax
:FUNCtion:GOFT:SOURce2?
The :FUNCtion:GOFT:SOURce2? query returns the current selection for the
second input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n> ::= {{1 | 2} | {3 | 4}} for 4ch models, depending on SOURce1
<n> ::= {1 | 2} for 2ch models
See Also •
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 586)
selection
selection
"Introduction to :FUNCtion Commands"
":FUNCtion:GOFT:SOURce1"
":FUNCtion:GOFT:OPERation"
on page 216
on page 220
on page 219
Commands by Subsystem
5
221