System:dsp - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:SYSTem:DSP

Command Syntax
:SYSTem:DSP <string>
<string> ::= quoted ASCII string (up to 254 characters)
The :SYSTem:DSP command writes the quoted string (excluding quotation
marks) to a text box in the center of the display. Use :SYStem:DSP "" to
remotely remove the message from the display. (Two sets of quote marks
without a space between them creates a NULL string.) Press any menu key
to manually remove the message from the display.
See Also •
336
(see page 586)
"Introduction to :SYSTem Commands"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 334