Waveform:segmented:count - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:WAVeform:SEGMented:COUNt

Query Syntax
:WAVeform:SEGMented:COUNt?
This command is available when the segmented memory option (Option SGM) is enabled.
N O T E
The :WAVeform:SEGMented:COUNt query returns the number of memory
segments in the acquired data.
The segmented memory acquisition mode is enabled with the
:ACQuire:MODE command. The number of segments to acquire is set using
the :ACQuire:SEGMented:COUNt command, and data is acquired using the
:DIGitize command.
Return Format
<count> ::= an integer from 2 to 250 in NR1 format (count set by
See Also •
•
•
•
Example Code •
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 586)
:ACQuire:SEGMented:COUNt).
":ACQuire:MODE" on page 159
":ACQuire:SEGMented:COUNt"
":DIGitize" on page 126
"Introduction to :WAVeform Commands"
"Example Code" on page 162
Commands by Subsystem
on page 161
on page 444
5
461