Acquire:segmented:count - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:ACQuire:SEGMented:COUNt

Command Syntax
:ACQuire:SEGMented:COUNt <count>
<count> ::= an integer from 2 to 250 in NR1 format
This command is available when the segmented memory option (Option SGM) is enabled.
N O T E
The :ACQuire:SEGMented:COUNt command sets the number of memory
segments to acquire.
The segmented memory acquisition mode is enabled with the
:ACQuire:MODE command, and data is acquired using the :DIGitize
command. The number of memory segments in the current acquisition is
returned by the :WAVeform:SEGMented:COUNt? query.
Query Syntax
:ACQuire:SEGMented:COUNt?
The :ACQuire:SEGMented:COUNt? query returns the current count setting.
Return Format
<count><NL>
<count> ::= an integer from 2 to 250 in NR1 format
See Also
•
•
•
•
Example Code •
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 586)
":ACQuire:MODE" on page 159
":DIGitize" on page 126
":WAVeform:SEGMented:COUNt"
"Introduction to :ACQuire Commands"
"Example Code" on page 162
Commands by Subsystem
on page 461
on page 153
5
161