Acquire:mode - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:ACQuire:MODE

Command Syntax
:ACQuire:MODE <mode>
<mode> ::= {RTIMe | ETIMe | SEGMented}
The :ACQuire:MODE command sets the acquisition mode of the
oscilloscope.
• The :ACQuire:MODE RTIMe command sets the oscilloscope in real time
The obsolete command ACQuire:TYPE:REALtime is functionally equivalent to sending
N O T E
ACQuire:MODE RTIMe; TYPE NORMal.
• The :ACQuire:MODE ETIMe command sets the oscilloscope in equivalent
• The :ACQuire:MODE SEGMented command sets the oscilloscope in
Query Syntax
:ACQuire:MODE?
The :ACQuire:MODE? query returns the acquisition mode of the
oscilloscope.
Return Format
<mode_argument><NL>
<mode_argument> ::= {RTIM | ETIM | SEGM}
See Also
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 586)
mode. This mode is useful to inhibit equivalent time sampling at fast
sweep speeds.
time mode.
segmented memory mode.
"Introduction to :ACQuire Commands"
":ACQuire:TYPE" on page 165
Commands by Subsystem
on page 153
5
159