Merge - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:MERGe

Command Syntax
:MERGe <pixel memory>
<pixel memory> ::= {PMEMory0 | PMEMory1 | PMEMory2 | PMEMory3
The :MERGe command stores the contents of the active display in the
specified pixel memory. The previous contents of the pixel memory are
overwritten. The pixel memories are PMEMory0 through PMEMory9. This
command is similar to the function of the "Save To: INTERN_<n>" key in
the Save/Recall menu.
See Also •
•
•
•
•
134
(see page 586)
| PMEMory4 | PMEMory5 | PMEMory6 | PMEMory7
| PMEMory8 | PMEMory9}
"Introduction to Root (:) Commands"
"*SAV (Save)" on page 108
"*RCL (Recall)" on page 104
":VIEW" on page 152
":BLANk" on page 124
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 118