Channel<N>:Impedance - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem
:CHANnel<n>:IMPedance
(see page 586)
Command Syntax
:CHANnel<n>:IMPedance <impedance>
<impedance> ::= {ONEMeg | FIFTy}
<n> ::= {1 | 2 | 3 | 4} for the four channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :CHANnel<n>:IMPedance command selects the input impedance setting
for the specified analog channel. The legal values for this command are
Ω Ω
ONEMeg (1 M ) and FIFTy (50 ).
Query Syntax
:CHANnel<n>:IMPedance?
The :CHANnel<n>:IMPedance? query returns the current input impedance
setting for the specified channel.
Return Format
<impedance value><NL>
<impedance value> ::= {ONEM | FIFT}
See Also
• "Introduction to :CHANnel<n> Commands" on page 176
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide 181