Timebase:window:scale - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:TIMebase:WINDow:SCALe

Command Syntax
:TIMebase:WINDow:SCALe <scale_value>
<scale_value> ::= scale value in seconds in NR3 format
The :TIMebase:WINDow:SCALe command sets the delayed window
horizontal scale (seconds/division). The main sweep scale determines the
range for this command. The maximum value is one half of the
:TIMebase:SCALe value.
Query Syntax
:TIMebase:WINDow:SCALe?
The :TIMebase:WINDow:SCALe? query returns the current delayed window
scale setting.
Return Format
<scale_value><NL>
<scale_value> ::= current seconds per division for the delayed window
See Also •
•
•
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 586)
"Introduction to :TIMebase Commands"
":TIMebase:RANGe" on page 347
":TIMebase:POSition"
":TIMebase:SCALe" on page 349
":TIMebase:WINDow:RANGe"
on page 343
on page 346
on page 352
Commands by Subsystem
5
353