Single - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:SINGle

Command Syntax
:SINGle
The :SINGle command causes the instrument to acquire a single trigger of
data. This is the same as pressing the Single key on the front panel.
See Also •
•
•
148
(see page 586)
"Introduction to Root (:) Commands"
":RUN" on page 146
":STOP" on page 150
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 118