Function:goft:source1 - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:FUNCtion:GOFT:SOURce1

Command Syntax
:FUNCtion:GOFT:SOURce1 <value>
<value> ::= CHANnel<n>
<n> ::= {1 | 2 | 3 | 4} for 4ch models
<n> ::= {1 | 2} for 2ch models
The :FUNCtion:GOFT:SOURce1 command selects the first input channel for
the g(t) source that can be used as the input to the FFT, INTegrate,
DIFFerentiate, or SQRT functions.
Query Syntax
:FUNCtion:GOFT:SOURce1?
The :FUNCtion:GOFT:SOURce1? query returns the current selection for the
first input channel for the g(t) source.
Return Format
<value><NL>
<value> ::= CHAN<n>
<n> ::= {1 | 2 | 3 | 4} for the 4ch models
<n> ::= {1 | 2} for the 2ch models
See Also •
•
•
220
(see page 586)
"Introduction to :FUNCtion Commands"
":FUNCtion:GOFT:SOURce2"
":FUNCtion:GOFT:OPERation"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 216
on page 221
on page 219