Acquire:aalias - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

:ACQuire:AALias

Query Syntax
:ACQuire:AALias?
The :ACQuire:AALias? query returns the current state of the oscilloscope
acquisition anti- alias control. This control can be directly disabled or
disabled automatically.
Return Format
<value><NL>
<value> ::= {1 | 0}
See Also
•
•
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
(see page 586)
"Introduction to :ACQuire Commands"
":ACQuire:DAALias"
on page 153
on page 158
Commands by Subsystem
5
155