Setting The Default Values For Logo - Siemens LOGO! Series Manual

Configuring LOGO!

7.2 Setting the default values for LOGO!

7.2 Setting the default values for LOGO!
You can set the following default values for a LOGO! Basic:
Clock settings
You can set the default values for time-of-day and date (Page 295) , summertime/wintertime
conversion (Page 111) and synchronization (Page 116):
● in parameter assignment mode by means of the set menu ("Clock" menu item)
● in programming mode by means of the setup menu ("Clock" menu item)
Contrast and backlight settings
You can set the default value for the display contrast (Page 296):
● in parameter assignment mode by means of the set menu ("LCD" menu item)
● in programming mode by means of the setup menu ("LCD" menu item)
You can set the default value for the backlight (Page 296):
● in programming mode by means of the setup menu ("LCD" menu item)
Menu Language
You can set the language (Page 298) in which the LOGO! menus will be displayed:
● in parameter assignment mode by means of the set menu ("Menu Lang" menu item)
● in programming mode by means of the setup menu ("Menu Lang" menu item)
Number of Base Module Analog Inputs
The LOGO! Base Modules LOGO! 24, LOGO! 24o, LOGO! 24C, LOGO! 24Co, LOGO!
12/24RC, LOGO! 12/24RCo and LOGO! 12/24RCE support four analog inputs. Formerly
they supported two. You can choose whether to use two or four analog inputs (Page 299) on
these modules:
● in programming mode by means of the setup menu ("BM AI NUM" menu item)
Start screen settings
You can select the default setting for the start screen (Page 300) that displays on LOGO!
and the LOGO! TD when LOGO! transitions to RUN mode:
● in parameter assignment mode by means of the set menu ("StartScreen" menu item)
Message Text settings
You can select settings that apply to all message text function blocks (Page 231) from the
Programming menu.
294
Manual, 04/2011, A5E03556174-01
LOGO!