3.7.12
Defining the type of analog outputs
Analog outputs can be either 0..10V/0..20mA, which is the default, or 4..20mA.
To define the type of analog outputs, follow these steps starting from the programming
menu:
1. Move the ">" cursor to "
2. Select "
3. Move the ">" cursor to 'AQ': Press
4. Select 'AQ ': Press OK
5. Move the ">" cursor to "
6. Select "
7. Move to the AQ that you want to change. Press
8. Select either default (0..10V/0..20mA) or 4..20mA. Press
9. Confirm your selection. Press OK
LOGO!
Manual, 04/2011, A5E03556174-01
①
": Press OK
②
": Press OK
LOGO! shows the following display, for example:
The defined type for each analog channel is shown. To change the type, continue as
follows
①
": Press
or
or
②
": Press
or
Programming LOGO!
3.7 Writing and starting the circuit program
or
or
109