Siemens LOGO! Series Manual page 293

Current value of a counter
View of a counter parameter in parameter assignment mode:
You can change the on/off threshold. This does not apply if the on or off threshold represents
the result of another function (in the "Up/down counter (Page 201)" topic, this is B021).
Current value of an hour counter
View of an hour counter parameter in parameter assignment mode:
You can edit the configured time interval MI.
Current value of a threshold trigger
View of the parameter of a threshold trigger in parameter assignment mode:
You can change the on/off threshold.
LOGO!
Manual, 04/2011, A5E03556174-01
7.1 Selecting parameter assignment mode
Configuring LOGO!
293