Diagnosing Errors From Logo - Siemens LOGO! Series Manual

Programming LOGO!
3.8 Configuring additional functions for LOGO! (0BA7 only)
3.8.6

Diagnosing errors from LOGO!

LOGO! 0BA7 supports error diagnostics. From LOGO!, you can view basic errors including
SD card read/write errors, network communication errors, and so forth. You can clear
individual error messages or all error messages. You can also view the firmware version of
your current LOGO!.
Viewing the firmware version of LOGO!
To view the firmware version, following these steps:
1. In the main menu, move the cursor to "
2. Confirm "
3. LOGO! shows you the diagnostic menu. Move the cursor to "
4. Confirm "
To return to the diagnostic menu, press ESC.
Viewing error information
1. In the diagnostic menu shown above, move the cursor to "
2. Confirm "
128
①
": Press OK
②
": Press OK
LOGO! shows you the firmware version of the module, for example as shown below:
③
": Press OK. LOGO! displays all errors detected. Press ESC to return to the
previous view.
①
": Press or
②
③
": Press
Manual, 04/2011, A5E03556174-01
": Press or
or
LOGO!