Setting The Start Screen - Siemens LOGO! Series Manual

Configuring LOGO!
7.2 Setting the default values for LOGO!
7.2.5

Setting the start screen

You can select the default setting for the start screen that LOGO! and the LOGO! TD will
display in RUN mode. You make this selection from LOGO! in parameter assignment mode.
To select the start screen:
1. Select parameter assignment mode (Page 288).
2. On the parameter assignment menu, select "
3. Confirm "
4. Move to "
5. Confirm "
6. Select the desired default setting: Press
7. To confirm your entry: Press OK
300
①
": Press OK
②
": Press
②
": Press OK
View in LOGO! 0BA6:
The current setting of the start screen is shown in the bottom row. The default setting is
③
" ".
You can choose to display the current time-of-day and date, or the values of the digital
inputs.
View in LOGO! 0BA7:
④
The menu command "
the start screen of LOGO! 0BA7 and the ES7 version of the LOGO! TD defaults to their
respective parameter assignment menus. You can also choose to display the current
time-of-day and date, or the values of the digital inputs:
①
or
" is available in LOGO! 0BA7 only. With this menu command,
or
": Press or
Manual, 04/2011, A5E03556174-01
LOGO!