Siemens LOGO! Series Manual page 280

UDF (User-Defined Function) (0BA7 only)
Editing elements to the inputs of a UDF block:
1. Switch LOGO! to programming mode.
2. Select "
3. Confirm "
4. Select "
5. Confirm "
6. Select "
7. Confirm "
280
①
" on the main menu: Press
①
": Press OK
②
": Press or
②
": Press OK
③
": Press or
③
": Press OK
The following display shows you an example of the circuit program that contains a UDF
block configured from LOGO!Soft Comfort. The display alternates between the following
two screen forms. UDF blocks are identified with a U. "U01" in "U01.1" refers to the first
UDF block that connects to Q1. ".1" refers to the first output of this UDF block that is
connected to Q1.
or
Manual, 04/2011, A5E03556174-01
LOGO!