LOGO! shows the following display:
The current setting of the automatic synchronization function is displayed on the bottom row.
The default setting is "
To enable/disable synchronization in parameter assignment mode:
If you want to enable/disable automatic synchronization in parameter assignment mode,
select "
enable/disable automatic synchronization.
Enabling synchronization
You want to enable synchronization:
1. Move the '>' cursor to "
2. Confirm "
LOGO! shows the following display:
LOGO!
Manual, 04/2011, A5E03556174-01
④
"; that is, disabled.
⑥
" in the parameter assignment menu , then menus "
⑤
": Press
⑤
"': Press OK
3.7 Writing and starting the circuit program
⑦
or
Programming LOGO!
③
" and "
". You can now
117