5. Press OK.
6. Enter your password.
7. Press OK. The circuit program and the password are deleted.
3.7.14
Summertime/wintertime conversion
You can enable or disable automatic summertime/wintertime conversion
● in parameter assignment mode by calling the menu command "
● in programming mode by calling the menu command "
To enable/disable automatic S/W Time conversion in programming mode:
1. Switch LOGO! to programming mode. LOGO! displays the main menu.
2. Select "
3. Confirm "
4. Move the '>' cursor to "
5. Confirm "
LOGO!
Manual, 04/2011, A5E03556174-01
②
": Press
or
②
": Press OK
③
": Press
③
": Press OK
3.7 Writing and starting the circuit program
②
"
or
Programming LOGO!
①
"
111