Overview - Siemens LOGO! Series Manual

5.2.2

Overview

The following table shows the menu structure of the Control Panel with the functions that are
available there for configuring your HMI device.
Menu entry
Start
Transfer
Info/Settings
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
Contrast
[...] Info
Logon/Settings
Startup Delay
Value
Screensaver
Value
Password
Password
Confirm Password
Transfer/Network
Channel 1: PROFINET
Enable (rem. on)
Enable (rem. on)
Disabled
IP Address/Station Name
Station Name
Station Name
IP Address static or via
DHCP
IP via DHCP
static IP
IP Address
Value
Subnet Mask
Value
Def. Gateway
Value
Function / Note
Changing monitor settings (Page 83)
Displaying information about the HMI device
(Page 83)
Setting the Screen Saver (Page 88)
Changing monitor settings (Page 83)
Changing password settings (Page 87)
Enabling a data channel (Page 84)
Changing the network configuration (Page 85)
Only available if "static IP" is set.
Only available if "static IP" is set.
Only available if "static IP" is set.
Configuring the HMI device
5.2 Configuring KP300 Basic
81