Siemens LOGO! Series Manual page 454

Configuring the HMI device
5.2 Configuring KP300 Basic
82
Network Mode
LLDP Protocol
Enable
Disable
Auto Negotiation
Enable
Disable
Speed
10 Mbits/s
100 Mbits/s
Communication Link
Half-Duplex
Full-Duplex
NTP
Synchronisation with
time server
Enable
Disable
Server [1..4] IP Address Only available if "Synchronisation with time server
Value
Test Server [1..4]
DateTime
Update rate
Value
Time shift
Value
Changing the network configuration (Page 85)
Only available if "Auto Negotiation = Enable"
Only available if "Auto Negotiation = Enable"
Time server configuration (Page 86)
= Disable"
Only available if "Synchronisation with time server
= Disable"
Shows date and time of the time server after a
connection has been successfully established.
Duration in seconds according to which the time-of-
day is synchronized.
Time difference in "hh:mm"
Operating Instructions, 04/2012, A5E02421799-03
Basic Panels