Siemens LOGO! Series Manual page 112

Programming LOGO!
3.7 Writing and starting the circuit program
6. Move the '>' cursor to "
7. Confirm "
LOGO! shows the following display:
The current setting of automatic S/W Time conversion is shown on the bottom row. The
default setting is 'Off': disabled.
To enable/disable automatic S/W Time conversion in parameter assignment mode:
If you want to enable/disable automatic S/W Time conversion in parameter assignment
mode, select "
now enable/disable automatic S/W Time conversion.
112
④
": Press
④
": Press OK
①
" in the parameter assignment menu, then menus "
or
③ ④
" and " ". You can
Manual, 04/2011, A5E03556174-01
LOGO!