Connecting A Programming Device - Siemens LOGO! Series Manual

3.3.4

Connecting a programming device

A programming device provides the following options:
● Transferring projects.
● Transferring device images.
Connecting a programming device to a Basic Panel DP
Note
A programming device cannot be used to reset the HMI device to factory settings.
Basic Panels
Operating Instructions, 04/2012, A5E02421799-03
RS 422/ 485
PROFIBUS
RS 485
PG
Mounting and connecting
3.3 Connecting the HMI device
1. Shut down the HMI device. Make
sure that the DIP switch on the rear
panel of the HMI device is in the
position shown.
2. Connect an RS 485 PROFIBUS
connector to the HMI device.
3. Connect an RS 485 PROFIBUS
connector to the programming
device.
41