O4: Maintenance Monitors; O5: Log Function - YASKAWA GA800 Programming Manual

1.13 o: Keypad-Related Settings
◆

o4: Maintenance Monitors

No.
Name
(Hex.)
o4-01 Elapsed Operating Time
Setting
(050B)
o4-02 Elapsed Operating Time
Selection
(050C)
o4-03 Fan Operation Time
Setting
(050E)
o4-05 Capacitor Maintenance
Setting
(051D)
o4-07 Softcharge Relay
Maintenance Set
(0523)
o4-09 IGBT Maintenance
Setting
(0525)
o4-11 Fault Trace/History Init
(U2/U3)
(0510)
o4-12 kWh Monitor
Initialization
(0512)
o4-13 RUN Command Counter
@ Initialize
(0528)
o4-22 Time Format
(154F)
RUN
o4-23 Date Format
(1550)
RUN
o4-24 bAT Detection Selection
(310F)
RUN
◆

o5: Log Function

No.
Name
(Hex.)
o5-01 Log Start/Stop Selection
(1551)
RUN
o5-02 Log Sampling Interval
(1552)
RUN
104
V/f CL-V/f OLV CLV AOLV
Sets the initial value of the cumulative drive operation time in 10-hour units.
V/f CL-V/f OLV CLV AOLV
Sets the condition that counts the cumulative operation time.
0 : U4-01 Shows Total Power-up Time
1 : U4-01 Shows Total RUN Time
V/f CL-V/f OLV CLV AOLV
Sets the value from which to start the cumulative drive cooling fan operation time in 10-
hour units.
V/f CL-V/f OLV CLV AOLV
Sets the U4-05 [CapacitorMaintenance] monitor value.
V/f CL-V/f OLV CLV AOLV
Sets the U4-06 [PreChargeRelayMainte] monitor value.
V/f CL-V/f OLV CLV AOLV
Sets the U4-07 [IGBT Maintenance] monitor value.
V/f CL-V/f OLV CLV AOLV
Resets the records of Monitors U2-xx [Fault Trace] and U3-xx [Fault History].
0 : Disabled
1 : Enabled
V/f CL-V/f OLV CLV AOLV
Resets the monitor values for U4-10 [kWh, Lower 4 Digits] and U4-11 [kWh, Upper 5
Digits].
0 : No Reset
1 : Reset
V/f CL-V/f OLV CLV AOLV
Resets the monitor values for U4-02 [Num of Run Commands], U4-24 [Number of Runs
(Low)], and U4-25 [Number of Runs (High)].
0 : No Reset
1 : Reset
V/f CL-V/f OLV CLV AOLV
Sets the time display format. This parameter is only available when using an LCD keypad.
0 : 24 Hour Clock
1 : 12 Hour Clock
2 : 12 Hour JP Clock
V/f CL-V/f OLV CLV AOLV
Sets the date display format. This parameter is only available when using an LCD keypad.
0 : YYYY/MM/DD
1 : DD/MM/YYYY
2 : MM/DD/YYYY
V/f CL-V/f OLV CLV AOLV
Sets operation when the drive detects bAT [Keypad Battery Low Voltage] and TiM [Keypad
Time Not Set].
0 : Disable
1 : Enable (Alarm Detected)
2 : Enable (Fault Detected)
V/f CL-V/f OLV CLV AOLV
Sets the data log function. This parameter is only available when using an LCD keypad.
0 : OFF
1 : ON
V/f CL-V/f OLV CLV AOLV
Sets the data log sampling cycle. This parameter is only available when using an LCD
keypad.
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
Description
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
YASKAWA TOEPYAIGA8002B GA800 Drive Programming
Default
Ref.
(Range)
0 h 523
(0 - 9999 h)
0 524
(0, 1)
0 h 524
(0 - 9999 h)
0% 524
(0 - 150%)
0% 524
(0 - 150%)
0% 524
(0 - 150%)
0 525
(0, 1)
0 525
(0, 1)
0 525
(0, 1)
1 525
(0 - 2)
2 526
(0 - 2)
0 526
(0 - 2)
Default
Ref.
(Range)
0 529
(0 - 1)
100 ms 529
(100 - 60000 ms)