About This Document - Siemens AlgoPilot B3Q661 Operating Instructions Manual

This document describes how to operate the AlgoRex CS1140 system.
Purpose
The document contains information about the terminals B3Q661, B3Q681 and B3Q686, and
Scope
applies to software versions EP7F.
This documentation and the instructions contained therein are intended for the following groups
Target audience
of persons, who perform specific tasks and have the necessary qualification.
Installation personnel
Commissioning personnel
Maintenance personnel
Operating personnel
Siemens offers the product training required. You will find information about the training mod-
Training
ules on the Siemens Intranet. If you cannot access this, please contact your Siemens partner.
8
Building Technologies
Fire Safety

About this document

Group of persons Activity
They install product, device or
system components on site.
and subsequently carry out a
general performance check.
They configure the product,
device or system in accord-
ance with the customer's -
specification on site.
Check the product operability
and release the product, sys-
tem or device for use by the
operator / customer.
They are also responsible for
trouble-shooting.
They undertake all the mainte-
nance work listed in the prod-
uct documentation and check
everything is functioning per-
fectly.
They only carry out procedures
which ensure that the product,
device or system runs correct-
ly.
General information i
Qualification
Professional training in the
field of building automation
or electrical installations.
They have had the training
appropriate to his/her func-
tion and to the products,
devices and systems to be
commissioned and have at-
tended the technical train-
ing courses for commis-
sioning personnel.
They have had training ap-
propriate to the function
and product.
They can read and under-
stand the instructions in the
documentation labeled as
"Operation".
No particular basic training
is required, they may have
to be instructed by experts.
A6V10225450_b_en_--
2017.09.07