Service Functions; Remote Transmission - Siemens AlgoPilot B3Q661 Operating Instructions Manual

Remote transmission

In the event of a FIRE ALARM, the remote transmission alerts the fire brigade.
What is 'Remote
There is normally a separate transmission path for FAULTS.
transmission'?
There are three types of remote transmissions which can be switched off separately:
Types of
· Remote transmission of fire alarms
'Remote
· Remote transmission of fault messages
transmission'
· Remote transmission of other messages
The remote transmission usually works in active alarm readiness.
When is the
'Remote
It is only switched off in exceptional cases, e.g. to test the monitoring functions.
transmission'
switched off?
All types of remote transmission can be switched off/on using the menu.
How is the
There is however a separate function key for switching off the remote transmission of fire
'Remote
transmission' alarms.
switched off?
Relates to the following terminal button and LED:
LED and button
for remote alarm
· <Remote alarm off>
transmission
•
·
2
Remote alarm
off
The remote transmission must be tested regularly by activating a manual call point.
Testing the
'Remote
transmission'
NOTE:
The fire brigade must be contacted before such a test is undertaken!
Building Technologies
Fire Safety

Service functions

Œ
button for switching over
LED indicates the 'OFF' status.
1
Œ
Performs switching over
Button
ON REMOTE transm. 'fire' = off
•
: REMOTE transm. 'fire' = stand-by
LED
OFF :
Basic system information &
A6V10225450_b_en_--
2017.09.07
117