Authorization Level - Siemens AlgoPilot B3Q661 Operating Instructions Manual

Operator access and access rights,

Authorization level

A distinction is made between the following authorization levels:
Types
Authorization
The functions and softkeys which may be available depend on the authorization level.
Impacts of the
F
access
See chapter "Function lists 4" on page 129.
levels
There are two ways of changing authorization level:
Changing au-
· Entering a password
thorization level
· Activating the key switch (if present)
· A 'Mixed form' is also possible where you activate the key switch (if present ) to e.g. go to au-
thorization level 2.1., and later enter a password to go to a higher level.
You can only change authorization levels when the primary menu is selected.
When can au-
You can start operating on one authorization level and then change to another one.
thorization lev-
els be changed?
The choice of functions available is defined for each authorization level by the service engineer.
Assigning func-
tions to authori-
zation levels
Building Technologies
Fire Safety
Access
level
Anyone
1
Operator 1
2.1
Operator 2
2.2
Service
3
continued
'Acknowledge' and 'Scroll' functions only
With restricted rights (e.g. caretaker)
With extended rights (e.g. security officer)
With all rights (for service engineer)
Basic system information &
Rights
A6V10225450_b_en_--
97
2017.09.07