Activating / Deactivating Zone - Siemens AlgoPilot B3Q661 Operating Instructions Manual

Activating / deactivating ZONE

Zones can be activated manually from the AlgoRex terminal.
What is this?
The following zones can be activated, but with different impacts:
Which zones
· Detector zones
can be activat-
· Control groups
ed?
The activation/deactivation commands have the following impacts:
How does this
impact on the
zones?
Element type
Detector zone
Control groups
If you still don't have operating access when starting operation work, the release procedure is
Operating ac-
automatically called up.
cess
Perform the following steps to activate a detector zone:
Activating
a
detector zone
Step
56
Building Technologies
Fire Safety
Activation produces a virtual alarm condition.
The danger level increases with each activation (depending on zone
type):
Warning à1st alarm à 1st subsequent alarm à 2nd subsequent alarm
Activate/deactivate
Action
Navigate to the DETECTOR ZONE
1
you want using:
<Operate..>
<Browse..>
<Browse FIRE DETECTION..>
<Browse EXTINGUISHING..>
<Select SECTION¯>
<Select ZONE¯>
Press softkey
2
<ACTIVATE zone>
Repeat step 2
3
Impact
t
t
- or -
t
t
Operating instructions Œ•Ž
Result / Comment
The zone functions are displayed
Implementation messages
'Implementing ...'
'Implemented'
Message depending on danger lev-
el (see above)
until you reach the danger level re-
quired/you want
A6V10225450_b_en_--
- and -
- and -
2017.09.07