Siemens AlgoPilot B3Q661 Operating Instructions Manual page 65

Changing detector PARAMETER SET ,
Perform the following steps to reset to the default parameter set:
Resetting to de-
fault
parameter set
Step
NOTE:
'Reset parameter set' means that the parameter set is reset to the value originally defined in the
system configuration.
Building Technologies
Fire Safety
Action
Press button <Information>
1
Select message
2
Parameter set changed
Press softkey
3
<Functions for sel. message..>
Press softkey
4
<Parameter set functions..>
Press softkey
5
<Parameter set -> DEFAULT>
Operating instructions Œ•Ž
continued
Result / Comment
Implementation messages
'Implementing ...'
'Implemented'
- and -
65
A6V10225450_b_en_--
2017.09.07