Manned' And 'Unmanned' Operating Mode - Siemens AlgoPilot B3Q661 Operating Instructions Manual

'Manned' and 'Unmanned' operating mode

The AlgoRex system is configured such that it works differently depending on whether a re-
What does this
sponsible person is present or not.
mean?
'manned'
'unmanned'
Relates to the following terminal LED and button:
LED and button
1
Premises
manned
· The 'Manned' and 'Unmanned' operating modes are of importance to the system in which the
To which sys-
signals of the automatic fire detectors and manual call points are processed in different ways,
tems does this
i.e. the Cerberus alarm concept is activated.
apply?
· Interactive detectors may also have a different sensitivity level depending on the 'Manned' or
'Unmanned' operating mode and depending on the parameter set.
A changeover can take place:
Changeover
· Automatically
methods
· Manually using the menu
· Manually using a button
NOTE If several systems, organized autonomously, are operated using a shared multi-area
terminal and if not all areas are in the same operating mode, the 'Manned operating mode' sta-
tus indicator flashes
F
Also refer to chapter "Switching ORGANIZATION to MANNED/UNMANNED " on page 26 in
section "Operating instructions Œ•Ž".
The automatic changeover from 'Manned' to 'Unmanned' (and vice versa) can be programmed
Automatic
by the service engineer.
changeover
You can also change over from 'Manned' to 'Unmanned' (and vice versa) using the menu.
Manual
changeover us-
ing menu
126
Building Technologies
Fire Safety
Operating mode
2
Œ
.
The operatorresponsible for 'Alarm' monitoring is present
on site.
The operator responsible is not present on site.
ON = 'manned'
Œ
LED
OFF = 'unmanned'
•
Manual changeover
Button
Basic system information &
Meaning
A6V10225450_b_en_--
2017.09.07