Siemens AlgoPilot B3Q661 Operating Instructions Manual page 27

Switching ORGANIZATION to MANNED/UNMANNED,
Proceed as follows to switch from 'Manned' to 'Unmanned' using the menu:
Switching over
using menu
Step
NOTE:
Switching over to the 'Manned' or 'Unmanned' operating mode using the menu will only affect
the area selected.
Building Technologies
Fire Safety
Action
Press softkey
1
<Operate..>
Press softkey
2
<Browse..>
Press softkey
3
<Browse FIRE DETECTION..>
Press softkey
4
<Switch to MANNED>
- or -
<Switch to UNMANNED>
Operating instructions Œ•Ž
continued
Result / Comment
The main menu appears on the display.
The sub-menu is displayed.
The AREAS menu is displayed.
If need be use scroll keys to select the
area you want
· The new operating mode can be read
off the display from the 'Information'
category.
•
· The
LED is lit up in the 'Manned'
status.
A6V10225450_b_en_--
27
2017.09.07