Siemens AlgoPilot B3Q661 Operating Instructions Manual page 59

Activating / deactivating ELEMENT / deactivating,
Perform the following steps to deactivate one of these elements:
Deactivating an
interactive
AnalogPLUS or
FD20 element
Step
Perform the following steps to activate a digital element:
Activating
a digital element
Step
It should be noted that activating a digital element may result in an alarm condition which under
certain circumstances may trigger controls, alarm horns and the remote transmission of alarms!
Building Technologies
Fire Safety
Action
Navigate to the activated
1
ELEMENT
Press softkey
2
<More functions..>
Press softkey
3
<DEACTIVATE element>
Action
Navigate to the ELEMENT you
1
want
Press softkey
2
<More functions..>
Press softkey
3
<ACTIVATE element>
Press button <Acknowledge>,
4
to confirm the alarm message
Operating instructions Œ•Ž
continued
Result / Comment
(Interactive, AnalogPLUS or FD20 ele-
ment)
The element selected is displayed in-
versely
Implementation messages
'Implementing ...'
'Implemented'
The element's response indicator goes
out.
Result / Comment
(Digital element)
The element selected is displayed in-
versely
Implementation messages
'Implementing ...'
'Implemented'
An alarm message from the correspond-
ing zones is displayed.
The alarm message is acknowledged.
A6V10225450_b_en_--
- and -
- and -
59
2017.09.07