Timeouts - Siemens AlgoPilot B3Q661 Operating Instructions Manual

Timeouts

A timeout is a particular, predefined time period,
What does this
· after which a particular action is undertaken
mean?
· which defines how long a particular status is to last.
AlgoRex recognizes the following types of timeout on the terminal:
What kinds of
· 'Operation' timeout
timeouts are
· 'Background lighting' timeout
there?
· 'Log-out' timeout
· 'Display result' timeout
A timeout is activated with every manual operating process. If the timeout is still running, it is re-
How is the
started with every subsequent input.
timeout activat-
ed?
Defines the delay time during which the system waits for an operating process before the cur-
rent message appears again.
'Operation'
This timeout can be configured for operation with and without pending alarms.
timeout
Defines the period for which the display background lighting remains lit after user input. This
timeout can be configured depending on the message category ('Alarm', 'Fault', 'Isolation',
'Background
'Informaion').
lighting' timeout
Defines the delay time after the last user input after which the system automatically logs the us-
er out.
'Log-out'
timeout
Defines the period for which the result of a query (e.g. reading information) is shown on the dis-
play.
'Display result'
timeout
All the above timeouts cam be configured by the service engineer.
How can the
timeouts
be
configured?
128
Building Technologies
Fire Safety
Basic system information &
- or -
A6V10225450_b_en_--
2017.09.07