Reading Event Memory - Siemens AlgoPilot B3Q661 Operating Instructions Manual

Reading EVENT MEMORY

The event memory is available at the following levels:
What types are
· Area
available?
· Station
· Only area-specific messages are displayed at AREA level.
What is the
Regardless of the section in which the event memory is read, all area-specific messages are
difference?
always displayed (e.g. messages of all sections in this particular area).
· At STATION level, all messages of the station selected are displayed (e.g. section-specific
messages and messages which are not dependent on section, such as logging in/out, power
supply messages or messages of other function units).
If you still don't have operating access when starting operation work, the release procedure is
Operating ac-
automatically called up.
cess
Perform the following steps to read the event memory at AREA level, e.g. for one fire section:
Reading event
memory for a
AREA
Step
Building Technologies
Fire Safety
Action
Navigate to the AREA you want using:
1
<Operate..>
<Browse..>
<Browse FIRE DETECTION..>
Press softkey
2
<Poll EVENT MEMORY..>
Press softkey
3
<ALL messages>
<ALARM messages>
<FAULT messages>
Set the FROM-TO area by entering the
4
time and date
press <
to start the search
Press softkey
5
t
t
- or -
- or -
- or -
- and -
ü
> ,
<Print>
Operating instructions Œ•Ž
Result / Comment
Use the scroll keys on the display
<ISOLATION messages>
- or -
<INFORMATION messages>
- or -
<TEST ALARM messages>
The
<Next field>
softkey can be used to move the
cursor.
· If a printer is fitted and you
want a print-out.
· Press the
<Abort printout>
softkey to stop the print-out
A6V10225450_b_en_--
81
2017.09.07