Activating / Deactivating Element - Siemens AlgoPilot B3Q661 Operating Instructions Manual

Activating / deactivating ELEMENT

Elements can be activated manually from the AlgoRex terminal.
What is this?
The following elements can be activated, but with different impacts:
Which elements
· Interactive detector element
can be activat-
· AnalogPLUS detector element
ed?
· FD20 detector element
· Digital element
· Control element
The activation/deactivation commands have the following impacts:
How does this
impact on the
elements?
Interactive detector element
AnalogPLUS detector element
FD20 detector element
Digital element
Control elements
If you still don't have operating access when starting operation work, the release procedure is
Operating ac-
automatically called up.
cess
Perform the following steps to activate one of these elements:
Activation of an
interactive
AnalogPLUS or
FD20 element
Step
58
Building Technologies
Fire Safety
Element type
Action
Navigate to the ELEMENT you
1
want
Press softkey
2
<More functions..>
Press softkey
3
<ACTIVATE element>
· The response indicator is activated/deactivated
· No impact on logical status of element.
Activation sets danger level 3, deactivation resets to danger
level 0.
Element is activated/deactivated
Result / Comment
(Interactive, AnalogPLUS or FD20 ele-
ment)
The element selected is displayed in-
versely
Implementation messages
'Implementing ...'
'Implemented'
The element's response indicator is -
activated.
Operating instructions Œ•Ž
Impact
- and -
A6V10225450_b_en_--
2017.09.07