About This Document - Siemens FT2080 Operation Manual

1 About this document

Target group
Operating personnel
Commissioning personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document describes the operation of the FT2080 fire terminal (Touch) in the
FS20 fire detection system. The reader shall understand the structure of a fire
detection installation, the PMI setup and the functions in the overall system. This
understanding makes an adequate behaviour possible in the event of fire or fault.
Scope
The information contained in this document is valid for the FT2080 fire terminal
(Touch), market package MP6.
Target groups
The information in this document is intended for the following target groups:
Activity
l Carries out procedures to correctly
operate the product.
l Configure the product at the place of
installation according to customer-
specific requirements.
l Check the product operability and
release the product for use by the
operator.
l Searches for and corrects
malfunctions.
l Carries out all maintenance work.
l Checks that the products are in
perfect working order.
l Searches for and corrects
malfunctions.
Source language and reference document
The source/original language of this document is German (de).
l
The reference version of this document is the international version in English.
l
The international version is not localized.
About this document
Applicable documents
Qualification
l No particular basic training is
needed.
l Has been instructed by the
commissioning personnel.
l Has obtained suitable specialist
training for the function and for the
products.
l Has attended the training courses
for commissioning personnel.
l Has obtained suitable specialist
training for the function and for the
products.
A6V10380629_en--_a
1
7
2015-09-10