Siemens AlgoPilot B3Q661 Operating Instructions Manual page 35

Switching DETECTORS OFF/ON,
Perform the following steps to switch ON an individual detector:
Reactivating de-
tector
(element)
Step
Perform the following steps to switch OFF a detector when in fault status:
Switching off a
detector when
there is a fault
message
Step
Building Technologies
Fire Safety
Action
Press button <Isolation>
1
Use scroll keys to select detector to
2
be switched ON
Press softkey
3
<Functions for sel. message>
Press softkey
4
<Select ELEMENT¯>
Press softkey
5
<More functions..>
Press softkey
6
<Element -> ON>
Action
Press <Faults> button
1
Use scroll keys to select detector
2
be switched OFF
Press softkey
3
<Functions for sel. message..>
Press softkey
<Select ELEMENT¯>
Press softkey
4
<More functions..>
Press softkey
5
<Element -> OFF>
continued
Result / Comment
Isolation messages are displayed
The detector selected is displayed
inversely
Implementation messages
'Implementing ...'
'Implemented'
Result / Comment
Fault messages are displayed
to The detector selected is displayed in-
versely
Implementation messages
'Implementing ...'
'Implemented'
Operating instructions Œ•Ž
- and -
- and -
A6V10225450_b_en_--
2017.09.07
35