Siemens AlgoPilot B3Q661 Operating Instructions Manual page 107

Alarm / buttons and displays,
How are
alarm messages displayed?, continued
Alarms
Alarm messages can be scrolled through in various ways:
Scrolling
through alarms
Building Technologies
Fire Safety
•
•
Alarm device
active
'
R em ote alarm
ac tive
'
A larm delay
off
•
Alarms
Ž
"
continued
'Alarm category selected' LED lights up if a message of this
category has been selected.
The alarms can be scrolled through by pressing the relevant
<Alarms> button.
'Acoustic signals active' LED lights up if at least one alarm de-
vices is active.
All alarm devices, within the assigned areas, are switched off by
pressing the relevant <Alarm devices active> button.
If all the alarm devices are switched off, you will switch on all de-
vices of assigned area by pressing the same button again.
The service engineer can set whether the alarm devices can be
activated at any time or just when there are alarms.
'Remote alarm active' LED lights up when the remote transmis-
sion of alarms is active.
'Alarm delay off' LED lights up if the alarm delay is switched
OFF.
If the relevant <Alarm delay off> key is pressed, the active re-
mote alarm transmission delay is stopped. This results in imme-
diate remote transmission.
<Alarms> button
Pressing this button moves the user back and forth between
the first (oldest) and last alarm.
If there are more alarms than can be displayed on one page,
this button moves the user back and forth between the pages.
<Alarm scroll> button
Pressing this button again and again takes the user consecu-
tively through all alarm messages.
Scrolling starts with the first alarm message.
Display scroll keys for <scroll up> / <scroll down>
Scrolls forwards or backwards through the alarm list.
Basic system information &
A6V10225450_b_en_--
2017.09.07
107