Compact Operating Instructions; Safety Instructions; Unpacking And Checking The Delivery - Siemens SIMATIC HMI IPC477C Comapct Operating Instructions

Compact Operating Instructions

1.1

Safety instructions

In order to avoid substantial damage and for your own safety, note the safety instructions in
this documentation and in the operating instructions.
Function test while installing the device in machines or execute systems
Following the results of a risk analysis, additional protection equipment on the machine or
the system is necessary to avoid endangering persons. With this, especially the
programming, configuration and wiring of the inserted I/O modules have to be executed, in
accordance with the safety performance (SIL, PL or Cat.) identified by the necessary risk
analysis. The intended use of the device has to be ensured.
The correct use of the device has to be verified with a function test on the system. This test
can detect programming, configuration and wiring errors. The test results have to be
documented and, if necessary, entered into the relevant documents that verify safety.
1.2

Unpacking and checking the delivery

1. Please check the packaging material for transport damage upon delivery.
2. If any transport damage is present at the time of delivery, lodge a complaint at the
3. Unpack the device.
4. Keep the packaging material in case you have to transport the unit again.
5. Please keep the enclosed documentation in a safe place. You will need the
SIMATIC HMI IPC477C / HMI IPC477C PRO
Compact Operating Instructions, 10/2010, A5E02368072-02
CAUTION
WARNING
shipping company in charge. Have the shipper confirm the transport damage
immediately.
NOTICE
Lie the front side on a soft surface to avoid damaging the front panel USB port.
Note
The packaging protects the device during transport and storage. Therefore, never
dispose of the original packaging material!
documentation when you start up the device for the first time.
1
5