GE Dash 3000 Service Manual page 23

Back View
Revision A
Equipment Overview: Components
On the back of the monitor you will find all connectors for equipment and
network.
H G F
Name
line voltage selector
A
audible alarm enunciator
B
Defib Sync connector
C
Aux port
D
Ethernet connector
E
peripheral expansion
F
port
G AC power connector
equipotential terminal
H
Dash 3000/4000 Patient Monitor
2000966-339
A
B
004A
E D C
Description
This selector is factory set to match the line voltage
rating for your country.
The internal speaker provides sound for audible alarms.
For better sound quality do not block speaker.
Provides ECG analog output signals to user-supplied
equipment. A 5-volt, 2-millisecond artificial pacer spike
is added to the analog output when PACE is on and
detection occurs.
Used for RAC 2A and other compatible auxiliary
devices.
Used to connect a monitor to a network configuration or
for downloading software.
Used for connectiong to a Dash Port
other compatible auxilliary devices.
Used for connecting an AC power cable.
For measurements in or near the heart we recommend
connecting the monitor to the potential equalization
system. Use the green and yellow potential equalization
cable and connect it to this pin.
®
docking station or
2-5