GE Dash 3000 Service Manual page 219

Revision A
Field Replaceable Units and Upgrades: Main Unit Components
21. Disassemble the handle assembly by removing top two screws.
22. Install the RF LAN antennas as shown into the plastic groves. The
antenna could be held in place with adhesive or sticky tape to help
aid in reassembly of the handle.
23. Reassemble the handle with the top two screws. Route cables out the
bottom of the handle as shown as to not pinch antennas between the
handle halves.
24. Route cables into the monitor's housing as shown. Connect the alarm
cable to the writer bracket.
Dash 3000/4000 Patient Monitor
2000966-339
564A
565A
566A
8-39