GE Dash 3000 Service Manual page 200

8-20
Field Replaceable Units and Upgrades: Display Assembly
5. Dampen a clean, soft cloth with window cleaner and carefully clean and dry the new
LCD display and the display filter to remove fingerprints and dust particles.
6. Install the new LCD display and reassemble the display assembly in reverse order.
Dash 3000/4000 Patient Monitor
2000966-339
d. Use a 5 mm nut driver to remove the
four stand-off screws anchoring the
display to the rubber display isolator.
e. Lift out the LCD display from the
rubber display isolator and set aside.
886A
887A
Revision A