Mitsubishi Electric MELDAS C6 Interface Manual page 323

B con-
Signal name
tact
J2CT OPERATION
—
ADJUSTMENT MODE VALID
[Function]
bit Abbrev.
bit0 -
[Related signals]
J2CT Control status (CTST1 to 4: R3500 to 3503)
J2CT Control command (CTCM1 to 4, L, H: R3600 to 3603, 3604, 3605)
J2CT In operation adjustment mode valid (common for all axes) (R3556)
6. EXPLANATION OF INTERFACE SIGNALS
6.4 PLC Output Signals (Data Type: R***)
Signal
abbreviation
J2CT operation adjustment mode valid (R3684)
J2CT operation adjustment mode valid signal (common for all axes)
1st spindle
R3684/bit0
Name
6-4-33
2nd spindle 3rd spindle