Mitsubishi Electric MELDAS C6 Interface Manual page 197

B con-
Signal name
tact
J2CT IN OPERATION
—
ADJUSTMENT MODE
[Function] [Operation]
J2CT In operation adjustment mode (R3556)
bit Abbrev.
bit0 -
bit1 -
bit2 -
bit3 -
bit4 -
bit5 -
bit6 -
[Related signals]
J2CT Control status (CTST1 to 4: R3500 to 3527)
J2CT Control command (CTCM1 to 4, L, H: R3600 to 3603, 3604, 3605)
J2CT Operation adjustment mode valid (common for all axes) (R3684)
6. EXPLANATION OF INTERFACE SIGNALS
6.2 PLC Input Signals (Data Type: R***)
Signal
abbreviation
Name
J2CT in 1st axis operation adjustment mode
J2CT in 2nd axis operation adjustment
mode
J2CT in 3rd axis operation adjustment mode
J2CT in 4th axis operation adjustment mode
J2CT in 5th axis operation adjustment mode
J2CT in 6th axis operation adjustment mode
J2CT in 7th axis operation adjustment mode
1st axis
R3556
6-2-37
2nd axis 3rd axis
— —