6. Troubleshooting
Lamp Test
The FrameSaver unit supports a Lamp Test to verify that all LEDs are lighting and
functioning properly. All LEDs flash or blink on and off at the same time every
1/2 second during execution of the test. When the test is stopped, the LEDs are
restored to their normal condition.
If the Test Timeout configuration option is enabled and a Test Duration is set, the
Lamp Test stops when the test duration expires. See
page 6-15 for additional information.
6-30
Main Menu → Test → Lamp Test
August 2001
Test Timeout Feature
on
9123-A2-GB20-20